Model VP is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570 F (298.80 C).  Listed to ULC S609, ULC/ORD C441 and UL 641. Features and Benefits: Available in 3" and 4" diameters. Full line of fittings and full range of pipe l

 MetalBest    SuperPro    SuperVent   

Versa-Liner is the most versatile Stainless Steel Chimney re-lining system on the market. Use the same components with either Rigid or Flex. Wood, Oil, Coal, and Gas applications. Listings: ULC-S635, ULC-S640 in Canada, UL 1777 in USA.

 MetalBest    SuperPro    SuperVent   

The Saf-T Vent® SC is a concentric vent system designed for zero clearance installation in residential and light commercial applications. It is approved for use on ANSI category I, II, III, and IV Gas-burning appliances, and direct vent or sealed combustion appliances approved by the appliance manufacturer. Do

 Heatfab   

Saf-T Vent GC is a single wall commercial venting product approved for use with gas-fired, ANSI Category I, II, III and IV appliances with flue gas temperature not above 550 F. Fabricated from special superferritic stainless steel AL 29-4C® it is available in standard sizes 18”- 32”.

 

 Heatfab   

EZ Seal is a single wall Special Gas Vent and Gas Vent Connector for use on ANSI Category I, II, III and IV gas fired appliances. EZ Seal is made of AL 29-4C®, and is suitable for use on condensing and positive pressure systems. Available in 3” – 16”  standard sizes.

 

 Heatfab   

Saf-T Vent CI Plus is the leading commercial double-wall special gas vent system made from superferritic stainless steel. With increased airspace between the inner flue conduit and the outer jacket, today’s CI Plus reduces the required clearance to combustibles and makes a more rigid flue pipe – large diameters

 Heatfab   

Saf-T Pipe is a 22 gauge cold rolled laser welded steel Black Stove Pipe – the heaviest in the industry. It is finished with a high quality, high temperature, silicone-based black stove paint. For use as the connector pipe between a woodstove and All-Fuel chimney.

 Heatfab   

Saf-T Liner is an All-Fuel Chimney Liner system which can be used as an appliance connector and breeching. It is available in 304 or 316L stainless steel with standard sizes ranging from 4” – 8”. 10”, 12” diameters available as Special Order.  Also offered is the unique Saf-T Wrap Chimney Liner Insulation System.

 Heatfab   

PELLET PIPE For venting pellet or corn burning stoves approved for use with PL Vent. The appliance's flue gases must not exceed 570 F (298.80 C). Sizes 3" & 4" Diameter Materials Case GalvalumeT AZ 150 Liner Type 304

 MetalBest    SuperPro    SuperVent   

MetalBest Double Wall Gas Vent is listed to UL 441 and ULC S-605 and features an aluminum inner liner and galvalume outer casing. Natural and Propane Gas applications. 3", 4", 5", 6", 7" & 8" inner diameters. Product line includes SWC Single Wall / DWC Double Wall Connectors and Model OV Oval Gas Vent.  

 MetalBest   

MetalBest Quick Connect Double Wall Gas Vent is listed to UL 441 and ULC S-605 and  features an Aluminum inner liner and Galvanized outer casing. Natural and Propane Gas applications. 10" through 48" inner diameters.

 MetalBest   

MetalBest Model OV Oval Gas Vent is listed to UL 441 and features an aluminum inner liner and galvanized outer casing. Natural and Propane Gas applications. 4", 5", 5/6" sizes.

 MetalBest   

HeatFab SGV/DGV is a safe and reliable venting solution for Category I, II, III, and IV gas appliances. This UL listed Special Gas Vent features a unique stainless steel alloy featuring exceptional corrosion resistance and easy to install connection system. Get HeatFab quality in an economical design!

 Heatfab   

Application: Chimney Liner for Category I gas fired appliances approved for use with B-Vent or appliances equipped with draft hoods. Approvals: USA: UL 1777 Chimney Liners Canada: ULC S635 Liners for Existing Masonry and Factory-Built Chimneys and Vents   Specifications: Liner Mate

 MetalBest    SuperPro    SuperVent   

TYPE B GAS VENT 8" TO 36"  For venting gas fired or propane appliances approved with B Vent and producing flue gas temperatures not in excess of 470 F (245C). Sizes Model MD, Medium Diameter = 8", 10" & 12" Large Diameter = 14"-36"

 MetalBest    SuperPro    SuperVent   

TYPE B GAS VENT 3" - 7"  For venting gas fired or propane appliances approved with B Vent and producing flue gas temperatures not in excess of 470 F (245C). Sizes Model SD, Small Diameter = 3" to 7"

 SuperPro    SuperVent   

DSP Double Wall Black Stove Pipe connects a Wood Stove to Insulated Chimneys. Double Wall system features a Black Aluminized Steel outer casing and Stainless Steel inner liner. 6" clearance to combustible materials. Sizes: 6", 7" & 8". Listings: UL103HT, ULC S-641

 MetalBest    SuperPro    SuperVent   

Direct-Temp for Multi-Fuel Stoves (DT-M) is a unique venting system designed to address the problem of highly corrosive flue gases produced by burning corn or other bio-fuels. It converts any conventional corn-burning or multi-fuel stove into a Direct Vent system.

 MetalBest    SuperPro   

Direct-Temp / Pellet is a revolutionary, high performance venting system. This one-of-a-kind system is two vents in one. The Stainless Steel Inner Pipe vents exhaust gases while the outer pipe supplies fresh outside air into the stove. Direct-Temp /Pellet is ideal for both sidewall and through-the-roof venting solutions and is available in 4”/6-5/8” diameter. And because DT/Pellet uses the same lengths as DT/Gas, inventory requirements are reduced.

 MetalBest    SuperPro   

The latest in Direct Vent Gas Fireplace Venting technology. Listed for use with a wide variety of Direct Vent Gas Fireplaces, Direct-Temp features a Stainless Steel inner liner, silicone woven fibreglass gaskets and a unique clean-look design. Available in 4" x 6 5/8" and 5" x 8" diameters. Selkirk Direct

 MetalBest    SuperPro    SuperVent   

Model DCC Double Wall Stove Pipe is UL-listed as a connector pipe between a wood stove and chimney. The smooth lines of the black outer wall allow for slip connectors and easy installation. 6" & 8" inner diameters. Sold exclusively through Specialty Hearth Dealers.  

 MetalBest    SuperPro   

"Saf-T Vent systems are Type BH Special Gas Vents manufactured using only high-grade stainless steel alloys. Wherever condensing flue gases can possibly come in contact with the flue, we use components made only from special superferritic stainless steel alloys such as AL 29-4C®."

Saf-T Vent Models include:
EZ Seal. Single Wall. Sizes 3"-5" residential 7 6"-16" commercial. Listings: UL 1738 and ULC S-636
CI Plus. Double Wall. Sizes: 5"-32". Listings: UL 1738 and ULC S-636
GC. Single Wall. Sizes: 18"-32". Listings: UL 1738, 1777 and ULC S-636, 635

 Heatfab   

Model DFS is a Neutral or Negative Draft Venting System for Appliances Burning Gas or #2 Oil. The double wall construction of Model DFS includes a Stainless Steel inner liner, 1/2" air space and galvanized outer casing. Model DFS is listed for use as a Type L Vent, a Type B Gas Vent and a Building Heating Appliance Chimney. Available

 Commerical & Industrial