Distrubution Channel: Commercial & Industrial
Site Search:
 Selkirk University In the Press  Join the Selkirk Mailing List Selkirk Supports Industry Education 
 
M  L  XL
Distrubution Channel: Commercial & Industrial
Direct Temp / Pellet
    

Direct-Temp / Pellet is a revolutionary, high performance venting system. This one-of-a-kind system is two vents in one. The Stainless Steel Inner Pipe vents exhaust gases while the outer pipe supplies fresh outside air into the stove. Direct-Temp /Pellet is ideal for both sidewall and through-the-roof venting solutions and is available in 4”/6-5/8” diameter. And because DT/Pellet uses the same lengths as DT/Gas, inventory requirements are reduced.

 MetalBest    SuperPro   

Direct-Temp / Multi-Fuel
    

Direct-Temp for Multi-Fuel Stoves (DT-M) is a unique venting system designed to address the problem of highly corrosive flue gases produced by burning corn or other bio-fuels. It converts any conventional corn-burning or multi-fuel stove into a Direct Vent system.

 MetalBest    SuperPro   

MetalBest QC Type 'B' Vent
   

MetalBest Quick Connect Double Wall Gas Vent is listed to UL 441 and ULC S-605 and  features an Aluminum inner liner and Galvanized outer casing. Natural and Propane Gas applications. 10" through 48" inner diameters.

 MetalBest   

Model DF Dual Fuel Piping System
   

Model DF is a Neutral or Negative Draft Venting System for Appliances Burning Gas or #2 Oil. The double wall construction of Model DF includes a Stainless Steel inner liner, 1/2" air space and galvanized outer casing. Model DF is listed for use as a Type B Gas Vent and a Building Heating Appliance Chimney. Available

 Commerical & Industrial   

Model DFS Dual Fuel (Small) Piping System
    

Model DFS is a Neutral or Negative Draft Venting System for Appliances Burning Gas or #2 Oil. The double wall construction of Model DFS includes a Stainless Steel inner liner, 1/2" air space and galvanized outer casing. Model DFS is listed for use as a Type L Vent, a Type B Gas Vent and a Building Heating Appliance Chimney. Available

 Commerical & Industrial   

Model G Single Wall Piping System
    

Model G is a single wall negative, neutral, or positive pressure capable, stainless steel pre-fabricated piping system for use in many applications including: grease duct, fume venting, chimney liner, chutes, particle conveying, etc. Model G is UL Listed for grease duct applications. Model G is c-UL Listed as a chimney

 Commerical & Industrial   

Model PS / IPS Pressure Stack
    

Models PS and IPS are modular, prefabricated piping systems which employ flanged joints designed for both quick assembly and pressure-sealing capabilities. They are usable for a wide variety of applications, including: Chimneys and stacks for Boilers & other types of building heating equipment. Chimneys for ind

 Commerical & Industrial   

Zero Clearance Grease Duct
    

ZeroClear is an innovative factory-built kitchen grease duct with a zero clearance rating and integrated chase construction. The 3" Insulated construction provides a 2 Hour Fire Resistance Rating and eliminates the need for a separate fire-rated enclosure around the duct. This light weight design is available in sizes

 Commerical & Industrial