Installation Planning Guide SuperVent USA Tested to UL 103 HT Installations may vary, please refer to the installation instructions   How to use this Planner: Before you begin, determine the Chimney diameter required. This should be the same diameter as your Wood Stove Flue Outlet 1. Select type of installation - By determining where your chimney will run. 2. Determine Total System Height - From the Connector Pipe to the top of the roof 3. Determine Roof Pitch - Refer to Roof Flashing Selection Chart 4. Determine if Chimney Offset Kit is Required   Now Follow the Steps to Complete the Material List for your Installation   STEP 1 - From the selection below; select your type of installation and the diameter of pipe required.       Cathedral Ceiling Support Planner 6" 8" Decorator Ceiling Support Planner 6" 8" Wall Support Planner 6" 8" Cathedral Ceiling Support Installation, more info: Ceiling Support Installation, more info: Wall Support Installation, more info: Cathedral Ceiling Support Kit - JSC*CCSK - Deluxe Rain Cap - Cathedral Ceiling Support - Stove Pipe Adaptor Ceiling Support Kit - JSC*DCSK - Deluxe Rain Cap - Attic Installation Shield - Decorator Ceiling Support - Stove Pipe Adaptor Wall Support Kit - JSC*WSK - Deluxe Rain Cap - Wall Bands (2) - Adjustable Wall Support - Stove Pipe Adaptor - Wall Thimble - Insulated Tee with Plug