Installation Planning Guide - Premium Series™ - Sure-Temp® Chimney System
Tested to 2100°F.  Listed to UL Standard 103

How to use this Planner:
Before you begin, determine the Chimney diameter required. This should be the same diameter as your Wood Stove Flue Outlet.

  1. Select type of installation - By determining where your chimney will run.
  2. Determine Total System Height - From the flue outlet to the top of chimney cap
  3. Determine Roof Pitch - Refer to Roof Flashing Selection Chart
  4. Determine if Chimney Offset Kit is Required

Now Follow the Steps to Complete the Material List for your Installation

STEP 1 - From the selection below; select your type of installation and the diameter of pipe required.
6" Roof 6"
8" Roof 8"
6" Ceiling 6"
8" Ceiling 8"
6" Wall 6"
8" Wall 8"

Pitched Ceiling
Support Kit (PCK):
Consists of round top, storm collar, smoke pipe adapter, finishing collar, adjustable pitch ceiling plate & roof support pkg.

Flat Ceiling
Support Kit (FCK):
Consists of roof termination kit, attic insulation shield, finish support package & smoke pipe adapter

Thru-the-Wall
Support Kit (TWK):
Consist of round top, 12" insulated pipe, wall band, insulated tee/plug, finishing collar, wall support kit, smoke adapter & insulated wall thimble
© copyright 2007 Selkirk Corporation